Conveyor head cold bonding method: cold glue adhesive to the joint. This joint approach than high efficiency mechanical joints, but also more economical conveyor Zhengzhou Which is good, you should be able to have a better fitting results, but from a practical point of view, as a result of process conditions more difficult to master Wanzhou conveyor Which is good, the other affect the quality of the adhesive joints is very large, so it is not very stable. Conveyor heat curing joint law: proven to be the best kind of joint approach to ensure a high joint efficiency, but also very stable, the joint life expectancy is long conveyor Henan Which is good, easy to grasp. But the presence of process cumbersome, costly, long time joints and other shortcomings. 3. The conveyor belt conveyor belt repair damaged parts and semi-cured strips of plastic conveyor belt surface brushing Which is good, dry home for a while, and then the second time brushing (dry set to sticky date, under normal temperature typically five minutes). 4. Place the patch attached to the conveyor belt sanding strip straightened surface, were beat with a rubber hammer or compaction compaction rollers, driven out of the air. Tips: If the ambient temperature is too low recommends using halogen lamps or hot air gun heating 0.5-1 hours to allow an appropriate extension of time if the heating time, will help to improve the strength of the adhesive surface. Which is good, Chengdu conveyor, conveyor Which is good, provided by Yichang South Africa South Africa hose hose tape Limited. Yichang South Africa hose tape Limited (www.znjgjd.com) strong, credible, Yichang, Hubei Province in other industries has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead South Africa into the brilliant hose and you work for a better future!