Refueling hose, the hose braided hose pumps dedicated wholesale, is an industrial hose. Structure tanker hose and general industrial hose, like all inner plastic and outer plastic and intermediate layers. Tanker pipe liner by a smooth fuel resistant rubber or thermoplastic elastomer (TPE) components. Enhancement layer tanker tube by a suitable reinforcing material. The outer layer of the non-corrugated tube tanker, fuel resistant, weather-resistant rubber or TPE composition. Tanker pipe for transporting fuel filler pipe and other aromatics content of not more than 60% of the operating environment; some import pipeline but also to transport leaded or unleaded gasoline, bio-diesel. When equipped with ultra-high pressure hose should be selected according to the requirements of ultra-high pressure washer host, because ultra-high pressure cleaner pressure and flow rate have very strict rules or restrictions, the inner tube diameter of change will affect the forefront of the work of high pressure water jet striking force and balance system. Experimental results show that the diameter of 4mm ultra-high pressure hose replace provisions of 5mm diameter UHP hose, life reduced to the original one-third of the results. Third, the use of ultra-high pressure hose, storage and safekeeping of the specific requirements of (1) ultra-high pressure washer in working condition, the hose may not be twisted, and avoid bending. If you must need to bend, will have to ensure that the bending radius is not too small, usually not less than 15 times the tube diameter braided hose wholesale Wu'an, otherwise it will lead to the outer reinforcing layer wire is stretched, the inside of the wire will be compressed to reduce the overall ultrahigh-pressure hose compressive strength, and ultimately affect the life of the hose. (2) ultra high pressure washer in working condition, high pressure hoses should not be subjected to heavy rolling, sharp bumps, does not bend, do not want to wear protective overcoat over; high-pressure pipe used to fly short distances fixation . (3) in the specific cleaning operations Gaocheng braided hose wholesale operations, to avoid frequent opening and closing hand high pressure spray gun in order to reduce the impact of pressure pulses to the hose, thereby extending the life of the hose. (4) In order to prevent accidents, to prevent loss or damage joints hurt, high pressure hose shall be provided with a protective sleeve woven wire connection ends at the junction. (5) When the installation and removal UHP hose connections, not demolitions strong twist, to protect the threaded connecting thread, also requires the installation required a threaded outer surface coated in sticky lubricating oil, use protective sleeve to protect connecting thread after disassembling . (6) high pressure hose in case of prolonged non-use of Zunhua wholesale braided hose should be emptied of water inside, according to the size of the provisions of the hose bending plate after rolled flat position. Special attention needs to be curved near the site of EHV hose couplings, joints should apply anti-rust oil, avoid contact with high temperature, high pressure and strong corrosive media. Jinzhou braided hose wholesale, wholesale braided hose, the hose is provided by Yichang CENTRAL SOUTH hose tape Limited. Yichang SOUTH hose tape Limited (www.znjgjd.com) (www.1234.com) strong, credible, in other industries, Hubei Yichang accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead CENTRAL hose into the brilliant and you work for a better future!